Kawasaki VN750 Forum banner

pinpointing an oil leak

1K views 3 replies 4 participants last post by  Sky Rider 
#1 ·


Does anyone know what this metal piece in the picture is called? I have oil leaking from it, around the gasket. I can't figure out what it's called. Help?
 
See less See more
1
#3 ·
There are a couple of O rings inside there....
P/N 671B2565 "0" RING,65MM (smaller one)
P/N 92055-1306 RING-O (larger one)


But I don't see any other seals? (atleast going by what I see at Ron Ayers)
 
#4 ·
There is an O ring that fits before the shims and the like where the clutch mechanism is. PN 92055-1306. I would imagine that if it is damaged, it would leak oil.
The other alternative is the gasket that seals the front bevel gear housing to the engine. When I reinstalled mine after the rebuild, the gasket got damaged and I leaked a fair amount of oil out of it. I ended up fixing it by removing the front bevel gear, cleaning the mating surfaces, and then using high temp RTV as a gasket. Havn't had a leak from there since.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top