Kawasaki VN750 Forum banner

Putting in a new speedo.

796 views 5 replies 3 participants last post by  Thorn 
#1 ·
What up everyone!! Hopefully someone can help me out.
I’m trying to run a generic speedo into the ignition switch (need to get power to it when I turn the key). Which wire do I splice into??
 
#2 ·
#3 ·
Brown wires to tachometer and fuel gauge are hot when the key turns in the ignition. The blue/red striped wire from the old speedometer wiring is hot once the engine is running (or when the key is turned in the ignition, if you've done the blue wire mod).
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top