92 Vulcan VN 750 A8 - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
VN750 General Discussion

 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old 03-19-2016, 10:31 PM Thread Starter
Member
 
Join Date: Jan 2015
Location: Southern Maine
Posts: 78
iTrader: (0)
 
Smile 92 Vulcan VN 750 A8

Hello All!

It's been a bit since I've come on here to chat about what's been going on in my Vulcan's world. So far I have had it 2 years. First year I got it running, Degoated, Ear shaved and dueled out the exhaust. I upped the jets to 142/42 and may go down to a 140/40 set up. I went with a bigger rear tire and moved and replaced the turn signals in the front to the forks to match the height of the rears.
This year I removed the dash and key and replaced the dash with a Koso speedometer combo, I have a digital voltage meter and a round water temp guage. My speedo is mounted on the handlebars where it used to have the Kawasaki logo. I have also used an old set of handlebars to make highway pegs which are welded onto the engine guard. I also eliminated many of the extra wire leads and simplified the harness. I have zero key other than gas tank. everything runs great so far and am hoping that by replacing some wires that heat affected as well as slimming them down overall will help with any charging issues I may have had. I am ordering a half round 13 guage front fender blank next month to add to this years mods.

I am trying to build a photo album for all of these mods and will share this very soon.

I want to thank you all on here. If it weren't for you all I would never have been able to do any of this work!

Thank you!

Kristoco
Kristoco is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 03-19-2016, 10:55 PM
FREEBIRDS MC CENTRAL NY
 
OleDirtyDoc's Avatar
 
Join Date: May 2011
Location: Norwich,NY
Posts: 15,873
iTrader: (0)
     
Garage
Send a message via Yahoo to OleDirtyDoc
Thank you for coming here.can't wait to see the pics

ONE RATS ASS GIVEN PER POST
Support your local FREEBIRDS MC
1986/5 Vn700/750 Frankenfook cross eyed bitch "Mellisa Fayhe"
I am a BIKER and i'm proud.FREEBIRDS MC CENTRAL NY

lowered with progessive 412 10" shocks
rejetted for K/N Pods part#rc 2340
sportster seat

'I didn't lose my mind.i gave it away

BRING BACK WOLFIE."Peace and Carrots"RIP
"And I'm free...as a bird"John Lennon Free as a Bird
"I only carry when I have my pants on"Joe Robinson RIP aka Old Dog
OleDirtyDoc is offline  
post #3 of 7 (permalink) Old 03-20-2016, 07:06 AM
Sparky!!!
 
slimvulcanrider's Avatar
 
Join Date: May 2008
Posts: 8,695
iTrader: (3)
   
Garage
pot up the pics in the project and builds section
slimvulcanrider is offline  
 
post #4 of 7 (permalink) Old 03-20-2016, 06:12 PM Thread Starter
Member
 
Join Date: Jan 2015
Location: Southern Maine
Posts: 78
iTrader: (0)
 
Tried loading pics to the site yet it won't let me. Says I have to contact admin yet the link says it's not accessible. So I'll do it to a folder on my Facebook account and post a link here to this thread or if the mods would move this to that mentioned thread I can post it there.

Thank you all!
Kristoco is offline  
post #5 of 7 (permalink) Old 03-20-2016, 06:40 PM
Senior Member
 
Spockster's Avatar
 
Join Date: Nov 2012
Location: WV
Posts: 6,483
iTrader: (5)
   
Quote:
Originally Posted by Kristoco View Post
Tried loading pics to the site yet it won't let me. Says I have to contact admin yet the link says it's not accessible. So I'll do it to a folder on my Facebook account and post a link here to this thread or if the mods would move this to that mentioned thread I can post it there.

Thank you all!
If you make some more replies in this thread you'll get permission to post pics.

2003-21k mi
Shaved w/UniPK92+Stock Jets-TPE/MOSFET-Shinko Tires-AGM batt-bags-chrome-LEDs...more
__________________________________________________ ____________
Repair Manual: http://www.mediafire.com/file/mj7z81..._Catalogue.pdf

Owner's Manual: http://www.mediafire.com/file/nscb5f...ers+Manual.pdf
Spockster is offline  
post #6 of 7 (permalink) Old 03-20-2016, 08:56 PM
Senior Member
 
Nitrospaz9's Avatar
 
Join Date: Jul 2013
Location: Saddle Brook, NJ
Posts: 1,067
iTrader: (0)
 
Sounds great. All things I wish I could of done but I have very little wrenching experience. Can't wait to see pics! And yea I hated the dash cluster too. My new bike just has one gauge but sadly no fuel gauge

2007 Kawi ninja-sold
1990 Vulcan 750-sold
2001 Honda Sabre 1100-wrecked then sold
2013 Victory Highball
Ride on wolf
Nitrospaz9 is offline  
post #7 of 7 (permalink) Old 03-20-2016, 10:40 PM Thread Starter
Member
 
Join Date: Jan 2015
Location: Southern Maine
Posts: 78
iTrader: (0)
 
Dude, I've got nearly zero experience in this other then self taught, YouTube, friends and guessing. When I can post pics I sure will!
Kristoco is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome