Im in the middle of the ear shave mod and need help. 1st i didn't buy stuff for coasting so what do i do with the hose that goes from the air box to the egr thing. 2nd pic, im supposed to vent one of these hoses from the carb right? 1 and 2 go to the fuel tank and 3 ( with the T fitting) is the vent right?

Attached Thumbnails

   

I would check the verses but I recall plugging the line with the tee in it and I just connected one of the bigger hoses to each other in the motor. It still had the marbles in it.

Or mabey it was the vac line on the carb.

One vac line goes to petcock, the other is capped. I removed all the epa hoses, air valve, surge tank and capped the reeds. I also went with a non-vacuum petcock so I capped both vac lines. The only hoses I have left is the 2 fuel inlet to carbs teed to the petcock. and the teed vent lines going to the nipple on fuel sender.