10mm - Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums
VN750 General Discussion

 
LinkBack Thread Tools Display Modes
post #1 of 10 (permalink) Old 04-13-2015, 11:09 PM Thread Starter
Senior Member
 
Join Date: Feb 2012
Posts: 579
iTrader: (0)
 
10mm

I have yet to figure out that when I need a 10mm socket I can't find one even though i have 3 of them and all I can find is 10mm wrenches. Then when I need the 10mm wrenches all I find is sockets. If that isn't good enough when I need either a 10mm socket or wrench neither can be found.

I know I need to put them back where they belong but where is the fun of getting aggravated in that?

Grace and Peace to you!
Richard
mrseedsower is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 04-14-2015, 03:10 AM
FREEBIRDS MC CENTRAL NY
 
OleDirtyDoc's Avatar
 
Join Date: May 2011
Location: Norwich,NY
Posts: 15,912
iTrader: (0)
     
Garage
Send a message via Yahoo to OleDirtyDoc
Welcome to my life lol

ONE RATS ASS GIVEN PER POST
Support your local FREEBIRDS MC
1986/5 Vn700/750 Frankenfook cross eyed bitch "Mellisa Fayhe"
I am a BIKER and i'm proud.FREEBIRDS MC CENTRAL NY

lowered with progessive 412 10" shocks
rejetted for K/N Pods part#rc 2340
sportster seat

'I didn't lose my mind.i gave it away

BRING BACK WOLFIE."Peace and Carrots"RIP
"And I'm free...as a bird"John Lennon Free as a Bird
"I only carry when I have my pants on"Joe Robinson RIP aka Old Dog
OleDirtyDoc is online now  
post #3 of 10 (permalink) Old 04-14-2015, 09:01 AM
Jack of all trades
 
M_Angell's Avatar
 
Join Date: Jul 2009
Location: Westland, Michigan
Posts: 2,863
iTrader: (11)
 
That's why I have like 6 of each...

2003 vn750
1988 Pontiac Trans Am (project/driver)
M_Angell is offline  
 
post #4 of 10 (permalink) Old 04-14-2015, 09:14 AM
FREEBIRDS MC CENTRAL NY
 
OleDirtyDoc's Avatar
 
Join Date: May 2011
Location: Norwich,NY
Posts: 15,912
iTrader: (0)
     
Garage
Send a message via Yahoo to OleDirtyDoc
Me too.all over the place

ONE RATS ASS GIVEN PER POST
Support your local FREEBIRDS MC
1986/5 Vn700/750 Frankenfook cross eyed bitch "Mellisa Fayhe"
I am a BIKER and i'm proud.FREEBIRDS MC CENTRAL NY

lowered with progessive 412 10" shocks
rejetted for K/N Pods part#rc 2340
sportster seat

'I didn't lose my mind.i gave it away

BRING BACK WOLFIE."Peace and Carrots"RIP
"And I'm free...as a bird"John Lennon Free as a Bird
"I only carry when I have my pants on"Joe Robinson RIP aka Old Dog
OleDirtyDoc is online now  
post #5 of 10 (permalink) Old 04-14-2015, 09:31 AM Thread Starter
Senior Member
 
Join Date: Feb 2012
Posts: 579
iTrader: (0)
 
I have a set of standard and metric set of sockets that I carry with me in my car but if I take them out and forget to put them back then when I needed them for work, well it makes things uncomfortable to say the least.

Grace and Peace to you!
Richard
mrseedsower is offline  
post #6 of 10 (permalink) Old 04-14-2015, 09:43 AM
Senior Member
 
LibertyPilot's Avatar
 
Join Date: Jul 2008
Location: Titusville, New Jersey
Posts: 6,400
iTrader: (0)
   
Imma git me one of them there big ol' red tool chests and build it into the wall of my garage after the Jul and I buy a house. I'm hoping that will help keep my tools organized.
LibertyPilot is offline  
post #7 of 10 (permalink) Old 04-14-2015, 10:05 AM
Members who have donated towards server costs
 
JM2001's Avatar
 
Join Date: Mar 2011
Location: Rochester, New York
Posts: 1,803
iTrader: (1)
 
Quote:
Originally Posted by mrseedsower View Post
I have yet to figure out that when I need a 10mm socket I can't find one even though i have 3 of them and all I can find is 10mm wrenches. Then when I need the 10mm wrenches all I find is sockets. If that isn't good enough when I need either a 10mm socket or wrench neither can be found.

I know I need to put them back where they belong but where is the fun of getting aggravated in that?
Best of both worlds in one wrench. I carry a whole set on my bike.
http://www.lowes.com/pd_338397-25428...ductId=3387702

http://www.lowes.com/pd_338362-22328...7C1&facetInfo=

JM2001

" Loud Pipes Risk Rights "

2001 Vulcan 750
marbled
TOC upgrade on ACCT
Air/fuel mixture set to 2 1/2 out
rectifier relocated
splines lubed
iridiums
decals removed
upgraded mirrors
Pic up coil mod done
degoated
All LED lighting
Upgraded Mosfet rectifier

Last edited by JM2001; 04-14-2015 at 10:11 AM.
JM2001 is offline  
post #8 of 10 (permalink) Old 04-14-2015, 10:58 AM
Jack of all trades
 
M_Angell's Avatar
 
Join Date: Jul 2009
Location: Westland, Michigan
Posts: 2,863
iTrader: (11)
 
Quote:
Originally Posted by LibertyPilot View Post
Imma git me one of them there big ol' red tool chests and build it into the wall of my garage after the Jul and I buy a house. I'm hoping that will help keep my tools organized.
It won't...I have a large tool chest and I rarely put my sht away so they end up all over the workbench. It truly is a bad habit.

2003 vn750
1988 Pontiac Trans Am (project/driver)
M_Angell is offline  
post #9 of 10 (permalink) Old 04-14-2015, 02:44 PM
2014 KLR 650!
 
Goofyfoot2001's Avatar
 
Join Date: Jun 2013
Location: Tega Cay, SC
Posts: 3,359
iTrader: (1)
 
The 10mm wrench is like the wand of St. Columbanus. The 10mm socket is like his pipe. The 10mm cross all platforms and is ever in need and never to be found. May the force be with you and luck ever in your favor my friend, my enemy, my everyone.


2014 Kawasaki KLR 650
Back to the Kawa World

Last edited by Goofyfoot2001; 04-14-2015 at 02:47 PM.
Goofyfoot2001 is offline  
post #10 of 10 (permalink) Old 04-14-2015, 03:28 PM
FREEBIRDS MC CENTRAL NY
 
OleDirtyDoc's Avatar
 
Join Date: May 2011
Location: Norwich,NY
Posts: 15,912
iTrader: (0)
     
Garage
Send a message via Yahoo to OleDirtyDoc
Quote:
Originally Posted by LibertyPilot View Post
Imma git me one of them there big ol' red tool chests and build it into the wall of my garage after the Jul and I buy a house. I'm hoping that will help keep my tools organized.
Don't work.got me one of them thar big red tool boxes in the shop but they don't stay in there.maybe I should start working in the shop and not the dining room

ONE RATS ASS GIVEN PER POST
Support your local FREEBIRDS MC
1986/5 Vn700/750 Frankenfook cross eyed bitch "Mellisa Fayhe"
I am a BIKER and i'm proud.FREEBIRDS MC CENTRAL NY

lowered with progessive 412 10" shocks
rejetted for K/N Pods part#rc 2340
sportster seat

'I didn't lose my mind.i gave it away

BRING BACK WOLFIE."Peace and Carrots"RIP
"And I'm free...as a bird"John Lennon Free as a Bird
"I only carry when I have my pants on"Joe Robinson RIP aka Old Dog
OleDirtyDoc is online now  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Kawasaki Vulcan 750 Forum : Kawasaki VN750 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

Once registered, your User Name"cannot be changed". We can make exceptions within 7 days, but after that, it is set in stone.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome